- The Fountain
The WFM5 has a Water Drinking Fountain and a Glass/Bottle Filler. It is mains connected and is fitted with a Doulton filter. The waste water is removed via a 32mm diameter Flexible and extendable waste pipe.
Water Flow control
The Water Fountain is rated to supply 1.7 litres per minute. An automatic self regulating control is fitted to overcome varying mains pressure.
Cabinet
Polished stainless steel top. Spray coated metal side panels. Easily removable front panel for ease of filter exchange & servicing.
Refrigeration System
Non Toxic, non flammable and environmentally sympathetic R-134a refrigerant. The refrigerant flow is controlled by a capillary tube with no moving parts. To provide for maximum heat exchange (and increase cold water capacity) a suction line is fitted to remove the heated air.
Cooling System
Stainless Steele 1.5 Litre cold water tank with chilling chamber to meet peak demand.
Cooling Capacity 19 l per hour to 10 C
from water inlet temperature of 26.7 C
and ambient temperature of 32.2 C
The hourly Cooling Capacity increases exponentially if the Incoming water temperature is less than 26.7 C, as will be the case in the UK.
Compressor & Condenser
Compressor: 1/5 h.p. capacity 230 watt
Condenser: Copper tube and expanded aluminium finish
Power supply
240 Volt, 50Hz. 3 pin plug and 200 cm power cord.
Dimensions & Weight
Dimensions: H 110 cm; W 35cm; D 35cm
Weight: 32 Kg
Waste Outlet: 46 cm
- The Junior Fountain
The Junior Water Drinking Fountain and
a Glass/Bottle Filler. It is mains connected and is fitted with a Doulton filter. The waste water is removed via a 32mm diameter Flexible and extendable waste pipe.
Water Flow control
The Water Fountain is rated to supply 1.7 litres per minute. An automatic self regulating control is fitted to overcome varying mains pressure.
Cabinet
Polished stainless steel top. Spray coated metal side panels. Easily removable front panel for ease of filter exchange & servicing.
Refrigeration System
Non Toxic, non flammable and environmentally sympathetic R-134a refrigerant. The refrigerant flow is controlled by a capillary tube with no moving parts. To provide for maximum heat exchange (and increase cold water capacity) a suction line is fitted to remove the heated air.
Cooling System
Stainless Steele 1.5 Litre cold water tank with chilling chamber to meet peak demand.
Cooling Capacity 18 l per hour to 10 C
from water inlet temperature of 26.7 C
and ambient temperature of 32.2 C
The hourly Cooling Capacity increases exponentially if the Incoming water temperature is less than 26.7 C, as will be the case in the UK.
Compressor & Condenser
Compressor: 1/5 h.p. capacity 230 watt
Condenser: Copper tube and expanded aluminium
finish
Power supply
240 Volt, 50Hz. 3 pin plug and 200 cm power cord.
Dimensions & Weight
Dimensions: H 61 cm; W 30.7cm; D 30.7cm
Waste Outlet: 46 cm